 |
|
| الإتصالات السلكية و الإتصالات اللاسلكية قسم الهواتف الثابتة و المتنقلة و تقنة الاتصالات اللاسلكية |
|
|
أدوات الموضوع |
|
||||||
2ونصف كيلو وات مكبر للهواة
السلام عليكم اخوة اعزاء انفراد جديد مكبر hf من 1حتى30 mhz لااول مرة طاقة بثين ونصف كيلو وات للهواة على منتدى عربى ولكن اعزرونى سارفقه ايضا بمنتدى هواة الاسلكى العرب SVETLANA POWER TRANSMITTING TETRODE The GU-84B is a ceramic-metal forced-air cooled tetrode intended for use in power amplifiers with distributed amplification and for SSB-signal amplification with output power up to 2.5 kW at frequencies up to 75 MHz as well as for power amplification at frequencies up to 250 MHz with output power up to 2.2 kW in radiotechnical equipment. The Svetlana 4CX2500/GU-84B is manufactured in the Svetlana factory in St. Petersburg, Russia. GU-84b is the military version of the Svetlana tetrodes.Typical use would be transmitters "PLAMYA" ("FLAME"-eng.),used on submarines.In emergency mode GU-84B can work without cooling aproximately 20-30 minutes.Many amateur radio stations see 4 KW in SSB and CW modes. They use GU-84B in long-lasting contests. CHARACTERISTICS: Intermodulation distortion of the 3rd order - minus 35 dB Anode Dissipation - 2.5 kW Screen Dissipation - 30 W Grid Dissipation - 1 W Frequency for Max. Ratings- 250 MHz Cathode... Oxide coated Heater voltage - 27 V Heater current - 3.7A Transconductance at Ua= 1.5 kV Ug2 = 375 V Ia = 2 A -->75 mA/V Capacitance Input /Output /Feed-through / -115 pF /23 pF/0.2 pF --> Max Seal and Envelope Temperature -200° C Maximum Length -115 mm Maximum Diameter -99 mm Weight-1.4 k g Operating Position -Any Blower -120 m3/h The GU-84B tetrode is used for power amplification in traveling-wave and single-sideband signal amplifier circuits and as power amplifiers in RF equipment. GENERAL Cathode: indirectly heated, oxide-coated. Envelope: metal ceramic. Cooling: forced air. Height: at most 112 mm. Diameter: at most 99 mm. Mass: at most 1.3 kg. OPERATING ENVIRONMENTAL CONDITIONS Vibration loads: frequencies, Hz 1-80 acceleration, m/ s 2 49 Multiple impacts with acceleration, m/ s 2 147 Ambient temperature, °C -10 to+ 70 Relative humidity at up to +35 °C, 98% BASIC DATA Electrical Parameters Heater voltage, V 27 Heater current, A 3.4-4.0 Negative bias voltage (at anode voltage 750 V, grid 2 voltage 375 V, anode current 2000 mA), absolute value, V 10-50 Grid 1 cutoff voltage (at anode voltage 2000 Volts grid 2 voltage 375 V, anode current 20 mA, anode resistance 0.5 k absolute value, V, at most 150 Zero anode current (at anode voltage 250 V, grid 2 voltage 375 V, grid 1 voltage 0), A 3.5-6 Grid 1 reverse current (at anode voltage 1000 V, grid 2 voltage 375 V, anode current 2000 mA)  A, at most 80Grid 2 current (at anode voltage 750 V, grid 2 voltage 375 V, anode current 2000 mA), mA -25 to +60 Mutual conductance (at anode voltage 750 V, grid 2 voltage 375 V, anode current 2000 mA), mA/ V 44-72 Output power under conditions of class AB, at frequencies 0.1-1 MHz (at anode voltage 2000 V, grid 2 voltage 375 V, grid 2 current at least 80 mA, absolute value), kW, at least 1.5 Output power under conditions of class B at frequency 250 MHz (at anode voltage 2000 V, grid 2 voltage 375 V, anode current 1500 mA, grid 2 current at least 60mA, grid 1 current at most 4mA), kW, at most 1.2 Interelectrode capacitance, pF: input 90-115 output 18-23 transfer, at most 0.2 Limit Operating Values Heater voltage (AC or DC), V 25.6-28.4 Anode voltage, kV: DC 2.2KV min to 4.2 KVmax A good working voltage for this tube is 3000v to 4000v Grid 2 voltage (DC) V 400 Negative grid 1 voltage (DC), absolute value, V 150 voltage (either polarity, absolute value), V 100 Cathode current, A: DC component 2 instantaneous value 6 لتحميل الملف أضغط هنا |
| اعلانات |
|
||||||
|
|
| اعلانات اضافية ( قم بتسجيل الدخول لاخفائها ) | |||
|
|
|
|||||
|
|
|
||||||
|
شكرا السيد المشرف العام
|
|
|||||
|
|
|
|||||
|
|
|
|||||
|
|
|
|||||
|
|
