[maher2007]

Remote monitoring & network configuration - Web Image Monitor

Web Image Monitor allows users to remotely monitor and change the network configuration of Ricoh Digital copiers and printers via common web browsers such as Internet Explorer or Netscape Navigator.
Check printer status

Once you have entered the right IP address, you can use common browsers such as Internet Explorer® or Netscape Navigator™ to see whether the printer is ready or not.
Platform independent

Because Web Image Monitor works via web browsers rather than PC software, it is platform independent and can be used with any operating system. As long as the target printer is networked and has an IP address, you can check its status at any time.
User-friendly monitoring

Using Web Status Monitor is as easy as browsing the Internet. Simply type in the IP address of the printer to check, and an HTML page will appear with the status of the target peripheral.



Contact us and ask to speak to a Solutions Specialist about this or any other Ricoh solution.

Visit to : http://www.ricoh.com.au/spt/210/Remo...e-Monitor.aspx

-------------------------------------------------------
كيفية الدخول علي Using Web Image Monitor

1Start a Web browser.

2Enter “http://(machine's IP address or host name) /” in the address bar to access the printer whose settings you want to change.

Top Page of Web Image Monitor appears.

3Click [Login].

The dialog box for entering the user name and password appears.

4Enter the user name and password, and then click [Login].

Contact your administrator for information about the settings.

5In the left area, click [Configuration], and then click [Network].

6Click [TCP/IP].

7Check that [Enable] is selected for [WINS] in the [Ethernet + Wireless LAN] column, and then enter the WINS server IPv4 address in [Primary WINS Server] and [Secondary WINS Server].

8Click [Apply].

9Quit Web Image Monitor.

Visit to: http://support.ricoh.com/bb_v1oi/pub...k/int/0128.htm