|
عندي ماكينة كانون ir5870ci وتعطي رسالة 0100 فما الحل افادكم الله
|
السلام عليكم
اخي العزيز بالنسنبه للعطل المذكور هذا شرح عن العطل
E100 Error Code: Because of deformation of laser shutter lever
0006-8846 iR C6800C / iR C6800CN / iR 5800C / iR 5800CN / iR 5870Ci / iR 5870C / iR 6870Ci / iR 6870C / iR C5880 / iR C6880 / iR C6880Ci / iR C5880Ci
Field Remedy
As a result of inspection, it was found that E100 was displayed because the laser shutter was not opened by the deformed laser shutter lever. When E100 is displayed,
visually inspect the laser shutter lever and replace it with a new one if a deformation is verified.
Cause
It is possible that the laser shutter lever was deformed because the hopper unit was installed into the machine while being lifted up forcibly and the tip of the lever
hit against the AP kit, causing its deformation.
FC5-1916: Laser Shutter Lever
E100-0002 Error Code: Fine lines appear on front side of image in sub scanning direction because laser
scanner assembly is faulty
0009-8908 iR C6800C / iR C6800CN / iR 5800C / iR 5800CN / iR 5870Ci / iR 5870C / iR 6870Ci / iR 6870C / iR C5880 / iR C6880 / iR C6880Ci / iR C5880Ci
Description
In the field, fine lines appeared in the front side of copy/print images in the sub scanning direction. During inspection, additionally, E100-0002 was also
displayed and was corrected by replacing the laser scanner assembly with a new one.
Field Remedy
When the symptom occurs, re-insert the connectors of the laser scanner assembly, DC Controller PCB, and Main Controller PCB. If the symptom still occurs,
replace the laser scanner assembly with a new one.
- E100-0002 can be displayed when the BD signal is not detected while the polygonal scanner is rotating stably.
FM2-0394 Laser Scanner Assembly[/RIGHT][/RIGHT][/CENTER][/CENTER][/CENTER][/RIGHT][/LEFT][/RIGHT][/LEFT]
ir 5870ci
