|
السلام عليكم اخواني
ارجو المساعدة في برنامج لتصفير طابعة كانون 280 ولكم الشكر والاجر الجزيل ودمتم في حفظ الله .
|
If this happens, just turn off the printer plug,then hold the reset\stop button,after that you turn on the plug while pressing the stop reset button, then follow these steps:
To reset waste ink counter:
-Press Menu-Scan-Copy-Scan to enter service menu.
-Use arrow keys to scroll to "Service menu counter access".
-Press OK.
-Use arrow keys to scroll to "ABS-M DOT COUNT"
-Press Copy.
-Use arrow keys to reset count to zero.
-Press OK.
-Press Stop/Reset.
To clean physical pads (optional):
-Open cover (as if replacing ink cartridge).
-Locate waste ink pads, they are far right under cartridge slider.
-Pry up waste ink pads (inky, might want to wear gloves).
-Rinse pads in sink or with alcohol, dry.
-Replace pads. Make sure pads are fully seated.
1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by pressing then OK
3)SET ABS-M LEVEL TO 0
4)OK
اخوان محتاج برنامج لتصفير طابعة كانون 280 الله يخليكم ضروري المساعدة
سوزان ادمون ( أعجبته المشاركة )
