|
مفيش حاجة في جميع مدلات اللكس مارك اسمها تصفير عداد الورق وجعل البرنتر تطبع كانها جديدة
دة اولا
اما موضوع المبة الصفراء دي شباية بتاعة خرطوشة الحبر بتتغير وكلوة يبقي تمام
سعرها ممكن يكون غالي شوية
|
ولكن في موقع الطابعة نفسه كاتبين انه احياناً حتى بعد تغيير الشيب تبقى اللمبة مضيئة في هذه الحال يجب عمل ريسيت وهذا هو نص ماا وجدته في موقع الدعم
You must reset the photoconductor page count at any time you replace the photoconductor unit. Otherwise, the printer will not register the photoconductor replacement, and it will think that the old photoconductor unit is still installed. The printer will therefore continue to display a Photoconductor (PC) Life Warning message. In addition, once the old, unreset photoconductor page count reaches a certain point, the printer will stop printing and display a Replace Photoconductor or a Photoconductor Exhausted message.
وهذا في موقع آخر
After replacing all the items in the photoconductor kit, reseAfter replacing all the items in the photoconductor kit, reset the maintenance counter:
1- Press and hold the Select and Return buttons while you turn the printer on.
2- Release the buttons when Performing Self Test appears on the display. The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
3- Press Menu until you see Reset Maint Cnt and then press Select. Reset appears on the second line of the display.
4- Press Select. Resetting Maint Cnt Value appears briefly on the display, and then is replaced by Config Menu on the top line and Reset Maint Cnt on the second line.
5- Press Menu until you see Exit Config Menu, and then press Select. Activating Menu Changes appears briefly, followed by Performing Self Test. The printer returns to the Ready state.
The light is second to the right is Toner Low. If ! and toner low displays a flashing light it means that the photoconductor kit is full and must be replaced. The printer will not print any more pages until the photoconductor kit is replaced.
Press and release Continue button to print a photoconductor kit instruction page. If the light is still blinking, replace the photoconductor kit.
For further assistance, please call Lexmark Technical Support.
