الاجهزه التى تبدا بحرف P
PANASONIC TX-29GF35T, TX-33GF85T, TX-29GF85T chassis M18
The option the test is included if to press simultaneously button OFF TIMER on the board and button VOLUME-(minus) on the forward panel of the TV. Adjustment of a microcircuit of memory after e ¦ replacements. To establish crosspiece O?A4 (contact 3 IC1213) and the case of the TV (weight). Then include a feed of the TV. The device perejd ¦ t in mode Market Mode. After the termination of operation the crosspiece is necessary for removing.

PANASONIC TC-24WG12H, TC-28WG12H GAOO Chassis M17W
The option the test is included if to press simultaneously button OFF TIMER on the board and button VOLUME-(minus) on the forward panel of the TV. Adjustment of a microcircuit of memory after e ¦ replacements. To establish crosspiece O?A14 (contact 3 IC1213) and the case of the TV (weight). Then include a feed of the TV. The device perejd ¦ t in mode Market Mode. After the termination of operation the crosspiece is necessary for removing.

PANASONIC TC-21E1R For an input in a service mode it is necessary to press service button S1101 on the basic payment of the TV. Inscription SNK will appear. After the first nahatija it is possible to adjust the basic (brightness controls, kontrasnosti, saturations, loudness and a phase (centering across)). The second pressing the button allows to adjust modes tsvitnost RGB. FUNC - change of adjustable object, NORM an output.

PANASONIC TC-29V50R CHASSIS MX-2A
Mode of fine tuning: Press the button of service switch S1101 (there is near to the switch a centering) the TV it will be switched in a mode of check on the screen inscription SNK will appear. Press button S1103 (FUN) for a choice of necessary adjustment, for an output press S1101.

PANASONIC TC14S1RCP, TX14S1TCC, TC21S1RCP, TX21S1TCC, TX21S1TCP CHASSIS Z5
Given to the chassis has an opportunity of self-testing. For a call of a mode of self-testing it is necessary to press simultaneously button OFF Timer on the board and button VOL (-) panels of the TV. Then the TV will enter process of self-testing and will give out on the screen the message which is resulted on rice 1



That designate these data. 1 (+) check EEROM (IC1205) plus is designated that everything is all right, 2 (+) with Check of the microprocessor of a teletext, 3 (+) Check of a tuner. The attention model of the TV without a teletext will show an option 2 (-).
Further it is necessary to make procedure of installation of options.
1. Establish a saturation of color and clearness on a minimum
2. Press button OFF Timer on board DU and key F panels of the TV. The image as on rice 2 Will appear



3. Choose the necessary option buttons UP/DOWN on board DU.
4. Choose decimal value buttons 0-7.
5. Press button STR for storing changes.
6. For an output from mode TEST press button F.

PANASONIC CHASSIS MX3, MX-3C
Simultaneously press RECALL on the board and-VOL panels of the TV. An output 2 times to press on the board button NORMAL.

PANASONIC TX-21AD2C, TX-29A3C, TX-25A3C CHASSIS EURO-2, EURO-1
Establish BASS a regulator of the bottom audiofrequencies on a maximum, TREBLE a regulator of the top audiofrequencies on a minimum. Press button F panels of the TV simultaneously with button REVEAL on the board.

PANASONIC GAOO70 TX2170T
For an input in the service menu it is necessary to press panels of TV V-(reduction of loudness) and keeping her pressed to press on the board the button on which izabrazhen a screen with plus. For an output from the menu it is necessary to go in a submenu. Tai in the top corner yellow it will be written CHK and ia?aou N.

PHILIPS 14PT-1342\43, 14PT-1352\00\01\05\07\11\39, 14PT-1542\01\43, 14PT-1552\00\01\05\11, 20PT-1342\43, 20PT-1542\43, 21PT-1532\58, 21PT-1542\43, 37TA-1232\03, 37TA1432\03, 37TA1462\18, 37TA1473\18, 52TB-2452\19, M-2052\00\01, M2152\00\07\15, M2182\00, M2192\05 CHASSIS L6,1 AA
There are 2 ways of ocurrence in service.
1. To short-circuit contacts S1 S2 on the processor (contact 14 IC7600)
2. With the help of the service board model RC7150 pressing it of button DEFAULT or ALIGN.
Output from service pressing button STAN-BY.

PHILIPS 25PT8303
Input iaiiapaiaiii to press "?" And "sleep" under epuoeie.

PHILIPS Anubis S\DD.
The input in a service mode is carried out by short circuit of contacts I31 and I32 (ground) near IC7710. Output STAN-BY.

PHILIPS 14PT-118A\50B\67R\94R, 14PT132A\50B\50R\75R, 14PT133A\162R, 14PT137A\162R, 14PT138A\54R\58T\67R\71R\74R\75R\93S, 20PT188A\50B\67R\73R, 20PT120A\78R, 20PT132A\75R, 20PT137A\62R, 20PT138A\50D\58R\58H\58R\67R\71R\73R\74R\75R\94R\9 7R. CHASSIS L7,1A\AA
Short-circuit contacts I24 and I25 on printed-circuit-board (RSV). An output from service pressing button STAN-BY. The attention the buffer of mistakes is cleared!!!

PHILIPS 21PT440B, 21PT441B/02B, 21PT442B, 21PT4303, 21PT4422, 24PW6302, 24PW6322, 25PT5403, 25PT45, 25PT4523, 25PT5302, 25PT5322, 25PT5403, 25PT5423, 25PT6322, 25PT4503, 52TA4311. CHASSIS MD1.2/AA/Processors TMP87CM36, TMP87CM38N
To an input in a service mode apply the board such as RC7150. With the help of the given board the TV can be transferred in two modes. 1 Service mode by default SDM (button DEFAULT). By default it is possible enter a mode also way short circuit of contacts S42 S43 on SSP (the panel of small signals). For an output from a mode press the button (Stand-by) (the buffer of mistakes is cleared). 2 Service adjusting mode SAM. The input in mode SAI is carried out by a parcel of command ALING by simultaneous pressing of keys (MENU) and (-). After an input in the menu you will see a picture as in figure 1.



For an output use the button (Stand-by) Behind mistakes it is possible to watch by means of a light-emitting diode on the forward panel of the TV. The list of codes of mistakes is resulted in the table.

An error code The description of a mistake Kol - in Blinkings A faulty component
0 There is no mistake --------- ----------------------
1 Mistake BIMOS (TDA8366) 1 IC7119 (SSP)
2 Mistake MSP3400/3410 2 IC7353 (SSP)
3 A mistake of trunk I2C 3 All components on trunk I2C
4 Not that ROM (EEROM) 4 IC7685 (SSP)
5 The ROM (EEROM) Is faulty 5 IC7685 (SSP)
6 A mistake of a tuner 6 U1000 (SSP)
7 A mistake of teletext TXT 7 IC7702 (SSP)
8 A mistake of processor Histogram 8 IC7210 (reserve)
9 A mistake of the processor 16:9 9 IC7440 (the module 16:9)
10 A mistake of module WSSB 10 IC7540 (module WSSB)
11 A mistake of processor Dolby 11 IC7600 (audio the module)

PHILIPS 25PT400/42, 25PT410A/42, 28PT400A/42, 28PT450A/42 CHASSIS GR2.2AA. processor TMP47C1637
The input in servistnyj a mode is carried out the following by image. Zamyknite contacts I33 and I34 (service), and pressing key INSTALL on letsivoj panels include network parekljuchatel. On the screen should message SER will appear. For an output from a mode of service it is necessary to press key STANDBY. Also in the given models is servistnoe the menu. Becomes more active pressing of key VOL +, and then in etozhe time pressing of key P +. In the second variant of value are remembered at once. Transition in a hotel mode is carried out as follows. Include the TV on 38 channel and simultaneously nazhamite keys VOL-, P-on the obverse panel of the TV.

PACE PRIMA Models: MSS100, MSS200, MSS500
Input in the service menu - (MENU), (0), (STORE), (RIGHT ANOW), (LEFT ANOW)

PRINCETON Model - AR2.7T
Input - keeping the button (+VOL) include the network switch

PROELCO Models: TAP2131, TAP2531, TAP2831 the Processor 82C52.
To close control points O?501. Keeping (R +) (R-) include the network switch.
Output from the menu - to remove crosspiece O?501.

PROELCO on the basis of processor SDA20563-A508/A516/A518.
To close a conclusion 21 processors on weight. To press on the TV (R +) and (R-) and to include the network switch.
Output - POWER OFF

PROSONIC Model CTV7289DVT the Processor - SAA5296. The chassis - 11AE16
Input - (MENU) (3 (2) (9) (7)
Output - (TV)

الاجهزه التى تبدا بحرف S

SABA Model - 21MG77C the Processor - ST9291 the Chassis - TX-90, TX-91, TX-92

From the board to press (STAND BY)
To switch off the TV the network switch
Keeping on board DU the button of a teletext (blue) - to include the network switch.
After inclusion of the TV to release a teletext.
If will not work, in item 4 the button to release and again quickly quickly to press.
An output from service - POWER OFF
SABA Models: 28DT178ME, 28WS78KE/M/MP, 28DH78K, 28DU78K, 28DU88M/NE, 28DU98MP, 32VT88NP, 37WS88ME.Oanne - ICC19.
For an input in the menu it is necessary keeping pressed buttons (PR-) and (VOL-) on the forward panel of the TV to include the network switch.

SABA Models: 52RW64E, 44W65ES, 52RW65ES, 52RW77WS
Include the TV keeping buttons (PROG-) and (VOL-)

SABA Processor ST9093. The chassis - ICC9.
Include the TV keeping the blue button on the board. To keep 5 sek. An output - POWER OFF

SABA Processor ST90R91 of the Chassis - ICC10
Way 1: Include the TV keeping the blue button on the board of 5 seconds.
Way 2: Include the TV keeping the button (PROG-) and (VOL-). To keep buttons 8 sek.
Output from the menu - POWER OFF

SALORA 6390, 7190, MV4000, PL14, 24101 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI processor CCU-SALO-07 (CCU20XX), chassis M1
(C) (*) (O/V) (*) (M), the Output - (!)

SALORA 5575SFN, 28T7, processor ST92T93, chassis STEREO PLUS
(i) (M) (P)
Output - (TV)

SALORA DIGIVISION 63..2, 71..2, 2.. N6 processor NES3-? NES2-.., chassis EUROSTE REO-1
(-/-) (MENU) (TV) - for 1 sek.

SALORA Processors TVPO2065-DO1, TVPO2066-A24
To close contacts 15 and 23 SAA1250 in PDU or to close contacts 14 and 19 SAA1250 in PDU. If at once have not come in the menu it is necessary to close in addition contacts 11 and 21 SAA1250 in PDU.
Output - (AV)

SAMSUNG, (monoblock) CHASSIS: SCV11A, B Model TVP3350, TVP5050, TVP5350
Input: StandBy-> P.Std-> Menu-> Sleep-> Power On
After an input in a service mode on the screen there is a menu: Adjustment, Option byte, Reset.
Reductions used in mode Adjustment: AGC - Auto Gain Control, SBT - Sub Bright, SCT - Sub Contrast, SCR - Sub Color, STT - Sub Tint, PDL - Pal Delay, NDL - NTSC Delay, RC - Red Cutoff, GC - Green, Cutoff, BC - Blue Cutoff, RG - Red-Green drive gain, BG - Blue-Green drive gain, PSL - PAL vertical SLope, PVS - PAL Vertical Shift, PVA - PAL Vertical Amplitude, PHS - PAL Horizontal Shift, NSL - NTSC vertical SLope, NVS - NTSC Vertical Shift, NVA - NTSC Vertical Amplitude, NHS - NTSC Horizontal Shift.

OPTION

BIT
ITEM
0
1

7
TTX NO TTX TTX
6
TTX SYSTEM LIST FIRST FLOF FIRST
5
CONTRAST 90 100
4
TUNER QUANTTITY 1 2
3
TUNER KINDS 2889 0889
2
SYSTEM (L) - -
1
SYSTEM (D/K) - -
0
SYSTEM (I) - -

OPTION 2

BIT
ITEM
0
1

7
NOT USED - -
6
NOT USED - -
5
POWER ON AFT ONCE TWICE
4
PDC NO YES
3
VPS NO YES
2
3.58 X-TAL NO YES
1
VIDEO PLUS NO YES
0
SHOWVIEW NO YES

VCR OPTION

BIT
ITEM
0
1

7
NOT USED - -
6
NOT USED - -
5
NOT USED - -
4
HEAD 2-HEAD 4-HEAD
3
SP/LP SP-ONLY SP/LP
2
SECAM N/A POSSIBLE
1
MESECAM N/A POSSIBLE
0
NTSC3.58 N/A POSSIBLE

SAMSUNG CK5038 ZR\TBWCX CHASSIS SCT11B
Press the following sequence of buttons from the board: STAND-BY-> P.STD-> HELP-> SLEEP-> POWER ON.
Output from me STATUS.
Under the panel of the board there is latent button HIDDEN with the help of this button it is possible to enter and leave the menu.

SAMSUNG CS7272 PTR\BWX CHASSIS SCT 51A
The input in the menu allows the following sequence of commands: PICTURE OFF-> SLEEP-> P.STD-> MUTE-> PICTURE ON.

SAMSUNG CK6202 CK7202 CHASSIS SCT12B Press the following sequence of buttons from the board: STAND-BY-> P.STD-> HELP-> SLEEP-> POWER ON.
Output key HIDDEN or STATUS.

SAMSUNG CS-721, CS-723 CHASSIS SCT-52A
Serially press buttons on board PICTURE OFF-> SLEEP-> P.STD-> MUTE-> PICTURE ON. Moving of the cursor of key CHANNEL and VOLUME.

SAMSUNG CK 6271 WP
For an input in the service menu it is necessary 1. Ha?aou the button (HIDDEN) - latent on the board 2. Ha?aou very quickly posled. (stand-by) 3. (p.std) 4. (help) 5. (sleep) 6. (power-on)

SAMSUNG CS 2139TR, CS21A0QWT, CK-564BVR, CZ-21H12T, CS-25M6HNQ, CS-21S4WR, CS-21S1S, CS-21D9 chassis KS1A
(STAND-BY) (DISPLAY) (MENU) (MUTE) (POWER ON)

SAMSUNG CS-29A6HTR PLANO
(STAND BY) (DISPLAY) (P.STD) (MUTE) (POWER ON)

SANYO C21ML1 (MG) the processor: VESTEL 19V1.0NT
Input in service. We press MENU (INSTALL), we put the cursor for the line "Adjustment".
Then we press consistently 4 => 7 => 2 => 5

SANYO CE14SA4 chassis AC5G, the processor - LC863440V
SANYO CM29KX5N chassis AC-5D
To press on PDU "MENU" and " VOLUME + " on the forward panel of the TV.
Choice of parameters buttons " TIMER " and " SOUND MODE "
Adjustment of parameters by buttons " VOLUME + " and " VOLUME - "

SONOLOR Models: 5552, 6352, 6363, 6372, 6383, 7163, 7172, 7183, 63SN601. Processor NES3AR01/02, NES2-2R01/4R01
Input: (-/-) (MENU) (TV) - all combination to press for 1 second.

SONY KV-N2171K, KV-C2171KR, KV-X2101K, KV-X2501K, KV-X2581K, KV-X2581KR, KV-M2540K, KV-M2541K, KV-X2901K, KV-X2981K, KV-X2981KR Chassis VE-3V
In an on duty mode during no more 20 with on PDU RM833 consistently press buttons: (Display on screen) (5) (VOL +) (TV). In a right top corner inscription TT--. Will appear
On a site master-tv.com there is a detailed description of adjustment.

SONY KV-M1440, KV-M2170, KV-M2171, KV-M2181, KV-M2101
Establish the TV in an on duty mode. Further it is necessary to press from the board of the button in sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The data are given for the board such as RM-836.

Quantity of flashes of a light-emitting diode
Value of mistakes

2 IC301ia non-volatile memory-a the order confirms transfer from 12N.
3 IC301iaeni?aaia flags.
4 There is no reverse motion of a beam across.
5 IC301ia?aiieiaiea the stack.
6 Protection on a pressure \oieo (contact 52) has worked a high level (1.)
7 IC002ia confirms transfer from I2C, IC301-a the order
8 IC002e IC301 there is no acknowledgement I2C.
9 General oshchibka I2C (SDAe SCLia a low level (0) IC301, IC001, IC002, CN001).


SONY KV-24WS1A/B/D/E/K/R/U CHASSIS BE-3B CXP85340A-116Q/117Q RM-837
Establish the TV in an on duty mode. Further it is necessary to press from the board of the button in sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV.

Quantity of flashes
Light-emitting diode Type of a microcircuit Whether a fatal mistake
2....9
NVM (EEROM)
YES

10
THE TELETEXT
©
11
RGB/JUNGLE
YES

12
Switch AV\TV.
©
13
PLLo?ia?a
YES



SONY KV-24WS2A/B/D/E/K/R/U CHASSIS BE-3D MSP3410B-PS-F7-T, MSP3410C-PS-C6-T RM-862
Establish the TV in an on duty mode. Further it is necessary to press from the board of the button in sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV.

SONY KV25C1/A/D/B/E/R/K, KV29C1/A/B/D/C/K/R/E/D1 CHASSIS BE-3D RM-839
Establish the TV in an on duty mode. Further it is necessary to press from the board of the button in sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV.

SONY KV-2170, KV2180, KV2540 CHASSIS BE4
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV.
Output 00.

SONY KV2181KR SHASSIS BE-4
Establish the TV in an on duty mode. Further it is necessary to press from the board of the button in sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The data are given for the board such as RM-836.

Quantity of flashes of a light-emitting diode
Value of mistakes

2 IC301ia non-volatile memory-a the order confirms transfer from 12N.
3 IC301iaeni?aaia flags.
4 There is no reverse motion of a beam across.
5 IC301ia?aiieiaiea the stack.
6 Protection on a pressure \oieo (contact 52) has worked a high level (1.)
7 IC002ia confirms transfer from I2C, IC301-a the order
8 IC002e IC301 there is no acknowledgement I2C.
9 General oshchibka I2C (SDAe SCLia a low level (0) IC301, IC001, IC002, CN001).


SONY KV-E2551A\B\E\K, KV-S29 JN1\MN1\SN1, KV-S34 JN1\MN1\SN1 CHASSIS AE-2B
Use the board such as RM-831. Include a feed of the TV, simultaneously pressing anyone 2 buttons on the forward panel of the TV.

Quantity of flashes of a light-emitting diode Type of a microcircuit Functional purpose
1
Trunk I2S
On SDAieceee a level (0.)

3
SDA3202
Tuner (FAPCH).

4
TDA9145
The decoder of chromaticity.

5
CXA1587
RGB/jungle.

6
TDA6612
The processor of a sound.

7
CXD2018Q
Development on a vertical.

8
CXA1545
Switch AV/TV.

9
© Protection of development on a vertical.



SONY KR-S4613 SHASSIS AP-2
Use the board such as RM-832. Include a feed of the TV, simultaneously pressing anyone 2 buttons on the forward panel of the TV.

Quantity of flashes of a light-emitting diode
Type of a microcircuit
Functional purpose

1
Trunk I2C
A low level on SDA

2
X24C16
EEROM

3
SDA3202
PLLo?ia?a

4
TDA9145
The decoder of chromaticity

5
CXA1587S
RGB/JUNGLE

6
TDA6612
The processor of a sound

7
CXD2018
Development on a vertical

8
CXA1545
Switch AV\TV.

11
SDA5248
A teletext.

13
© Zashita vertical development.



SONY KV-B2911/A/D/B/K, KV-B2912V, KV-B2913E CHASSIS AE-2
Use the board such as RM-830. Include a feed of the TV, simultaneously pressing anyone 2 buttons on the forward panel of the TV. In a right top corner of the screen the message VOL will appear. Then press button MENU. A mistake it is possible opredilit by quantity of flashes of a light-emitting diode of the TV located on the forward panel. So-called process of self-diagnostics.

Quantity of flashes of a light-emitting diode
Type of a microcircuit
Functional purpose

1
Trunk I2C
A low level on SDA

2
X24C16
EEROM

3
SDA3202
PLLo?ia?a

4
TDA9145
The decoder of chromaticity

5
CXA1587S
RGB/JUNGLE

6
TDA6612
The processor of a sound

7
CXD2018
Development on a vertical

8
CXA1545
Switch AV\TV.

11
SDA5248
A teletext.

13
© Zashita vertical development.



SONY KV-T25MF1
To establish the TV in an on duty mode Then from the board to enter the following sequence of commands DISPLAY-> 5-> VOLUME +-> POWER. The sequence of operations in mode SERVIS is those. 1e4 moving under numbers of a position, 3e6 increase and reduction of values, MUTING to write down, 0 execution of record. Board RM-870 Is applied

SONY KV-M2540
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The board model RM-833 Is applied

SONY KV-S29 RN1\34RN1 SHASSIS G1
Ocurrence in a mode of service is carried out with the help of board RM-821. Include the TV in an on duty mode. Further press the following combination of buttons of the board: DISPLAY-> 5-> VOL +-> POWER

SONY KV-S2941A\B\D\K, KV-S2942U, KV-S2943E SHASSIS AE-2F RM-831
Include a feed of the TV, and then press button VKL on du twice. In a right top corner inscription TT will appear, then press button MENU.

Quantity of flashes of a light-emitting diode
Type of a microcircuit
Functional purpose

1
Trunk I2C
A low level on SDA

2
X24C16
EEROM

3
SDA3202
PLLo?ia?a

4
TDA9145
The decoder of chromaticity

5
CXA1587S
RGB/JUNGLE

6
TDA6612
The processor of a sound

7
CXD2018
Development on a vertical

8
CXA1545
Switch AV\TV.

11
SDA5248
A teletext.

13
© Zashita vertical development.



SONY KV-B2911/A/D/B/K, KV-B2912V, KV-B2913E CHASSIS AE-2
Use the board such as RM-830. Include a feed of the TV, simultaneously pressing anyone 2 buttons on the forward panel of the TV. In a right top corner of the screen the message VOL will appear. Then press button MENU. A mistake it is possible opredilit by quantity of flashes of a light-emitting diode of the TV located on the forward panel. So-called process of self-diagnostics.

Quantity of flashes of a light-emitting diode
Type of a microcircuit
Functional purpose

1
Trunk I2C
A low level on SDA

2
X24C16
EEROM

3
SDA3202
PLLo?ia?a

4
TDA9145
The decoder of chromaticity

5
CXA1587S
RGB/JUNGLE

6
TDA6612
The processor of a sound

7
CXD2018
Development on a vertical

8
CXA1545
Switch AV\TV.

11
SDA5248
A teletext.

13
© Zashita vertical development.



SONY KV-29X1A\B\D\E\K\L\R\U CHASSIS BE-3D
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The board model RM-839. Is applied

A mistake
Quantity of flashes of a light-emitting diode
Operation of the scheme of protection
2

A low level of signal SLCia to trunk I2C
3

A low level of signal SDAia to trunk I2C
4

A low level of signal SLCe SDA
5

Kontreller JUNGLE/CHROMAia answers
6

The switch of video does not answer
7

The tuner does not answer
8

MSPia answers
9

NVMia answers
10

A low level of signal M3L TXD
11

A low level of signal M3L RDX
12

A low level of signal M3L ENABLE
13

A low level of signal M3L TXD and RXD
14

Damage of test Compact Text
15

Switch Avne is dumped at inclusion of a feed
16

It is impossible to initialize jungle
17

Answer NVMiia?a?aai after initialization
18

Some microcircuits do not answer
19

Wrong operating time Compact Text
20

The answer of switch Avpovrezhden after the answer
21

The answer of controller JuNgLe/ChRoMapovrezhden after the answer
22

Compact Textia answers
23

تابع حرف S
SONY KV-29X1A\B\D\E\K\L\R\U CHASSIS BE-5
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The board model RM-836. Is applied

Quantity of flashes of a light-emitting diode
Value of mistakes

2 IC301ia non-volatile memory-a the order Confirms transfer from 12N,
3 IC301iaeni?aaia flags.
4 There is no reverse motion of a beam across.
5 IC301ia?aiieiaiea the stack.
6 Protection on a pressure \oieo (contact 52) has worked a high level (1.)
7 IC002ia confirms transfer from I2C, IC301-a the order
8 IC002e IC301 there is no acknowledgement I2C.
9 General oshchibka I2C (SDAe SCLia a low level (0) IC301, IC001, IC002, CN001).


SONY KV-S2951 KR CHASSIS AE-3
Use the board such as RM-831. Include a feed of the TV, simultaneously pressing buttons - and + on the forward panel of the TV.

Kol - in megany a light-emitting diode
The description
A payment

1
A general mistake of trunk I2C
-

2
A mistake of microcircuit ST24C16
AND

3
A mistake sub controller CXP85332
AND

4
A mistake of video of processor CXD2030R
IN \A 1

5
A mistake of a digitizer of digitization CXD2032R
IN \A 1

6
A mistake of the converter of review CXD2035R
IN \A 1

7
A mistake of video of controller TDA1839
AND

8
A mistake of driver CRT TDA1840
AND

9
A mistake of switch AV\TV CXA1855
J

11
A mistake of microcircuit Megatext CDA5273
AND

12
A mistake of the processor of sound TDA6812
AND

16
V-protectioncaueoa on a pressure
-



SONY KV-16WT1 A\K\R\U
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The board model RM-836. Is applied

Quantity of flashes of a light-emitting diode
Value of mistakes

2 IC301ia non-volatile memory-a the order confirms transfer from 12N.
3 IC301iaeni?aaia flags.
4 There is no reverse motion of a beam across.
5 IC301ia?aiieiaiea the stack.
6 Protection on a pressure \oieo (contact 52) has worked a high level (1.)
7 IC002ia confirms transfer from I2C, IC301-a the order
8 IC002e IC301 there is no acknowledgement I2C.
9 General oshchibka I2C (SDAe SCLia a low level (0) IC301, IC001, IC002, CN001).


SONY KV-C2173 B/E, KV-C2171 D/K/KR CHASSIS BE-3B:
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The board model RM-833. Is applied

Quantity of flashes
Light-emitting diode Type of a microcircuit Whether a fatal mistake
2....9
NVM (EEROM)
YES

10
THE TELETEXT
©
11
RGB/JUNGLE
YES

12
Switch AV\TV.
©
13
PLLo?ia?a
YES



SONY KV-2501 A/D/K, KV-C2503 B/E, KV-C2508 D/E, KV-C2509 B/D/E/K.
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV. The board model RM-833. Is applied

Quantity of flashes
Light-emitting diode Type of a microcircuit Whether a fatal mistake
2....9
NVM (EEROM)
YES

10
THE TELETEXT
©
11
RGB/JUNGLE
YES

12
Switch AV\TV.
©
13
PLLo?ia?a
YES



SONY KV-G21M1\G21P1\G21S11, KV-T21M1\T21MF1\T21MN1\T21MN11
Method of an output from service: press 2 times button POWER. A method of record in memory: Enter service to press a combination of buttons on the board 1 (UP) 4 (DOWN) will choose adjustable parameters. Press button MUTE for a call of screen WRITE (zel) press a key 0 for input in memory.

SONY KV-21T10R
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV.

SONY KV-21C4B/D/E/K/R KV-21X4A/B/D/E/K/L/R/U CHASSIS BE-5 processor SDA5255-A024. Board RM-836.
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV.

Quantity of flashes of a light-emitting diode
An error code
The description

2
30
The microcircuit of controller JunglebZh confirms transfer of a high level on trunk I2C

3
31
Flags of the MISTAKE of a microcircuit of controller Jungle

4
32
There is no signal of reverse motion across

5
40
The processor of a sound does not confirm transfer of a high level on trunk I2C

6
91
There is no vertical synchronization

7
10
Non-volatile memory NVMia confirms transfer of a low level on trunk I2C

8
20
The tuner does not confirm transfer of a high level on trunk I2C

9
01
A mistake of general trunk I2C

10
90
An input of protection:caueoa on X-ray (x-ray radiation).



SONY KV29F3A/B/D/E/K/R/U CHASSIC BE-3D Processor SDA302C263-GEG Board RM-862
Establish the TV in an on duty mode, and press buttons on the board in following sequence ON SCREEN DISPLAY-> 5-> VOLUME +-> TV.

A mistake
Quantity of flashes of a light-emitting diode
Operation of the scheme of protection
2

A low level of signal SLCia to trunk I2C
3

A low level of signal SDAia to trunk I2C
4

A low level of signal SLCe SDA
5

Kontreller JUNGLE/CHROMA does not answer
6

The switch of video does not answer
7

The tuner does not answer
8

MSP does not answer
9

NVM does not answer
10

A low level of signal M3L TXD
11

A low level of signal M3L RDX
12

A low level of signal M3L ENABLE
13

A low level of signal M3L TXD and RXD
14

Damage of test Compact Text
15

Switch Avne is dumped at inclusion of a feed
16

It is impossible to initialize jungle
17

Answer NVMiia?a?aai after initialization
18

Some microcircuits do not answer
19

Wrong operating time Compact Text
20

The answer of switch Avpovrezhden after the answer
21

The answer of controller JuNgLe/ChRoMapovrezhden after the answer
22

Compact Textia answers
23



SHARP 14\21 JN1 CHASSIS SP-51
When the input 37 microcontrollers during 3 next periods is in a condition of a high level the service menu is caused.

SHARP VT-1428M, VT-2128M
Establish the TV in an on duty mode, and press buttons on the board in following sequence CH UP within 2 or more seconds and simultaneously press button POWER. An output from the menu pressing of button MENU.

SHARP 54AT-15SC
For an input in service it is necessary to press in sequence the following buttons from the board. POWER OFF then simultaneously VOL-and CH + on the panel of the TV. Then POWER ON and to keep VOL-and SN + while the TV will not be started.

SHARP 14D-SC, 14B-SC, 20B-SC, 14D-CM, 21D-CK1, CV-2132CK1 CHASSIS PAL-A.
Establish switch S1008 in a position servistnogo a mode.

SHARP 14R-SC/M8/M10, 14R-W, CV-14RU
Establish switch S1006 in a position servistnogo a mode.

SHARP DV-5450SC CHASSIS S3B processor IX1492BM, SDA-20561
Enter a service mode it is necessary to connect on block VIDEO terminals (2) and (6). Then press button MODE on board DU. The message-SERV-will appear. Then remove the crosspiece. A choice of adjustment SN-and SN +.

SHIVAKI CHASSIS 11AK19
For an input in sersisnyj a mode it is necessary to do the following manipulations. First enter the menu instaljatsii key INSTALL then press keys on the board in the following sequence 4, 7, 2 and 5. Find in the menu position ADJUST (all adjustments vary through it).

SHIVAKI STV1415 CHASSIS 11AK20
For ocurrence in the service menu it is necessary to execute procedure of an input within 4 seconds. It is necessary to press consistently following keys from board DU. (VOL-), (Prog), (-), (TV). Parameters choose buttons (PROGRAM UP) (PROGRAM DOWN), and change (VOL-), (VOL +). For storing press the red button. For an output use button TV.

SHIVAKI STV2905 CHASSIS DY-900

Press button SERVICE of board DU.
Thus on the image will appear OSD (the screen display) " Line SVC ". After that press the button-/-DU.
At this time there is a loading of the given fixed channels from a microcomputer in memory.
The loaded data represent the following:
(1) .STD 4CH And
62,25 Mg
(2) .STD 5CH And
172,25Mg
(3) .STD 7CH And
189,25Mg
(4) .STD 25CH And
503,25Mg
(5) .STD 34CH And
575,25Mg
(6) .STD 40CH And
623,25Mg
(7) .STD 50CH And
703,25Mg


Color of the fixed channels on OSD - green.
For viewing the channels which have been written down in memory press button PR +,-.
Adjustment V-SIZE (the size on a vertical)
For reception of test table RETMA press button PR +,-.
For performance of adjustment press the button "6" PDU, and on the image will appear OSD " STV VAMP32 ".
Pressing on knokli VOL +, - adjust the size on a vertical. Other adjustments onalogichny.
SHIVAKI STV 2040 chassis 11AK30-2, the processor - ST92195C7B1/PAL VESTEL/T30F016, the videoprocessor - STV2248C
Input in service: we Press MENU, then we press consistently 4 => 7 => 2 => 5

SHIVAKI STV-2139 the processor - Z9023306PSC, the videoprocessor - TB1238BN
Input in service: in an operating conditions to press consistently on PDU: DISPLAY => MUTE => SLEEP => FUZZY
Choice of a mode of the menu: DISPLAY, SLEEP, MUTE

الاجهزه التى تبدا بحرف T
THOMSON, TELEFUNKEN CHASSIS TX-90, TX-91
To put the TV in an on duty mode from the board. Then to switch off his network button. To press on the board the button of a teletext (blue) and not releasing to include the network switch. Then to release sharply the button of a teletext and at once to press.

THOMSON new generation.
At the switched off feed we press sideways "V-" and "P-" it is kept and we include a feed. There is a service of the menu.

THOMSON 21MG77C
THOMSON 21MG10E the processor: TDA9554PS/N1/0301
For an input in the menu it is necessary to do the following
TV - in stand-by (an on duty mode) from the board.
To switch off TV the network button.
Oaap?eaay on the board the button of a teletext to include TV the network button.
After inclusion of a light-emitting diode in full pa?ei - what there at you - green, epaniue?) to release the button of a teletext
If not npaaioaao all same, only in item 4 button of a teletext to release and again aunopi epaoeiapaiaiii to press.
TOSHIBA 1450 XN\XNE 1458XNH 2050XN 2150 XNE\XHC\XC CHASSIS S5E
Inclusion of function of self-checking: When on the screen it is deduced by the menu of adjustment press the button 9 on the board. Process of self-testing will begin.

TOSHIBA 2150 (the chassis - S5E)
Input:

mute
Again to press MUTE and not ioiyneaou
To press MENU on TV
"4" - eippaeoey eiiopanoa. "1", "2", "3" - otsechka R, G, B "AV" - auaip a test signal., " - apiieinou + " - paayeepiaea.
Output: off - a feed.

TOSHIBA 2185XR
For an input in the service menu it is necessary
Ha?aou on PDU the button (MUTE)
Still pac to press the button (MUTE) and to not release her
Ha?aou on TV the button (Menu)
Each pressing the button (CHANNEL UP) changes paaoeepiai?iua positions Each pressing the button (+VOLUME) and (-VOLUME) changes the data. An output - deenergizing TV.

TOSHIBA
1. In pa?eia SERVICE to press on a box the button - aipeciioaeuiay line ON/OFF (epo?i?ae with nopaeeie). Each following pressing changes eapoeieo. 2. In pa?eia the menu paaoeepiaie kn. (9) input in the menu of self-diagnostics SELF CHECK. ******** - iiiap ieepiipioannipa Power - 00 - diagnostics of a power unit. 00 - iipia if oeopu apoaea the system of protection - shows how many pac npaaaouaaea propensity to tokovym iapaapoceai. Bus line - ipiaapea shinnyh circuits. OK-iipia, SDA - GND - a goat of trunk SDA on weight, SCL - GND - similarly trunk SCL. SDA-SCL - essno among themselves. Bus cont - ipiaapea shinnyh components. OK - iipia. Q *** NY - ieepinoaia with iiiapii *** iaenipaaia. SYNC - neiopiiecaoey. OK - iipia. NG - ipio. paaioaao also tries iipaaaeeou type of video signal

الاجهزه التى تبدا بحرف U
و هى جهاز واحد

UNIMOR Model - SIESTA-3/3A Processor SDA20562-A508/A515/A522.
Input in the service menu: To close a conclusion 21 on weight. To press on the TV (R +) and (R-) and to include the network switch.
Output from the menu - POWER OFF

الاجهزه التى تبدا بحرف W
و هى ايضا جهاز واحد
WALTHAM Model - WT821
Input in the service menu - From the board from TV " Horizon " without schedules to press the button (SERVICE), on indekatore it will be highlighted CH, to press once again - will appear OR, is farther loudness to choose numbers of registers (1-4) and figures (1-9) to change bats. After to press (Memory).

الاجهزه التى تبدا بحرف X
XANTRAX TC-2172S (chassis TD-18)
The videoprocessor: TD1238N
The processor of management: TMP87CK38N
Three service modes are used: S, D, M.
S-mode - service;
D-mode - expanded service;
M-mode - accelerated + training.
Input in a service S-mode of adjustment (SERVICE MODE) with usual PDU: in an operating conditions of work of the TV to press and keep on the forward panel button VOL-(loudness in the minimal position) to press on PDU button DISPLAY. In the left top corner of the screen of the TV symbol S meaning inclusion of a special mode of service adjustment will appear.
The choice of new function is made by pressing on PDU buttons PROG + or PROG-.
Adjustment of value of function is made by pressing on PDU buttons VOL + or VOL-.
By pressing on PDU buttons-/-on the screen the vertical sweep vanishes. On a luminescence of a narrow horizontal strip to adjust accelerating pressure.
Values of adjustable functions enter the name in memory automatically.
The input in service modes D, M is possible only with the help special service PDU.
The TV comes back in a normal operating mode after deenergizing a network and repeated inclusion.

XANTRAX TC-1466, TC-2066S, TC-2166S, TC-2068S, TC-2168S, Chassis ST-208, 209
The videoprocessor: TDA8842
The processor of management: MTV212MS64U
Input in a service mode of adjustment (SERVICE MODE) with usual PDU:
In an on duty operating mode of the TV consistently to press on PDU buttons MUTE, AV, MENU, POWER.
In the main menu of the user there is a new line - SERVICE.
Enter the base service menu press on PDU button VOL +. Reulirovka values of function it is made by pressing on PDU buttons VOL + or VOL-.
The choice of new function is made by pressing on PDU buttons P + or P-.
The schedule of the base menu SERVICE:
SCREEN - reg. Parameters of the screen
CATHODE - reg. Modes of cathodes
TUNING - a choice of parameters of a tuner
SCR - a subsaturation
OSD Pos. - adjustment of position OSD across
SCREEN, CATHODE, TUNING have the enclosed submenus.
Values of adjustable functions enter the name in memory automatically. The TV comes back in a normal operating mode after deenergizing a network and repeated inclusion.

الاجهزه التى تبدا بحرف Z
ZENITH IQB64W10W
8-6-5-4-5-6-8
7-5-3-2-3-5-7
6-4-2-1-2-4-6
7-5-3-2-3-5-7
8-6-5-4-5-6-8
To type from the board one of codes and to press (ENTER) or (DISPLAY)

ZENITH IQB64W10W
9-8-7-6
To type from the board a code and to press (ENTER) or (DISPLAY)